Converting 1200 lux to lumens depends on the surface area illuminated. If the area is 1 square meter, then 1200 lux equals 1200 lumens. Lux measures illuminance, lumens measure luminous flux, so the conversion requires multiplying lux by the area in square meters.
Lux is the amount of light per unit area, while lumens indicate total light output. Without knowing the area, lux cannot directly convert to lumens. Assuming 1 square meter gives a straightforward conversion: lumens = lux × area.
Conversion Tool
Result in lumens:
Conversion Formula
The conversion between lux and lumens depends on the surface area being illuminated. Lux (lx) measures illuminance, the luminous flux per unit area, while lumens (lm) measure total luminous flux. The formula to convert lux to lumens is:
Lumens (lm) = Lux (lx) × Area (m²)
This works because lux equals lumens divided by square meters, so multiplying lux by the area cancels the denominator leaving total lumens. For example, if a surface of 2 square meters is illuminated at 1200 lux:
- Calculate lumens: 1200 lx × 2 m² = 2400 lumens
- This shows total luminous flux falling on the area.
Conversion Example
- Example 1: Convert 1000 lux over 1.5 m² to lumens
- Apply formula: 1000 × 1.5
- Result: 1500 lumens
- This means total light output on 1.5 m² is 1500 lm.
- Example 2: Convert 850 lux over 0.75 m²
- Calculation: 850 × 0.75 = 637.5 lumens
- Luminous flux on that area equals 637.5 lm.
- Example 3: Convert 2000 lux on 3 m²
- Using formula: 2000 × 3 = 6000 lumens
- Indicates total light output across 3 square meters.
- Example 4: Convert 500 lux on 0.4 m²
- 500 × 0.4 = 200 lumens
- Smaller area yields smaller total lumens at same lux.
Conversion Chart
The chart below shows lux values ranging from 1175.0 to 1225.0 converted into lumens assuming an illuminated area of 1 square meter. To use the chart, locate the lux value, then read across to find corresponding lumens, which equals lux × area.
| Lux (lx) | Area (m²) | Lumens (lm) |
|---|---|---|
| 1175.0 | 1 | 1175.0 |
| 1180.0 | 1 | 1180.0 |
| 1185.0 | 1 | 1185.0 |
| 1190.0 | 1 | 1190.0 |
| 1195.0 | 1 | 1195.0 |
| 1200.0 | 1 | 1200.0 |
| 1205.0 | 1 | 1205.0 |
| 1210.0 | 1 | 1210.0 |
| 1215.0 | 1 | 1215.0 |
| 1220.0 | 1 | 1220.0 |
| 1225.0 | 1 | 1225.0 |
Related Conversion Questions
- How many lumens correspond to 1200 lux on a 2 m² surface?
- What area is required for 1200 lux to equal 2400 lumens?
- Can 1200 lux be converted to lumens without knowing area?
- If a room is lit at 1200 lux, how do I find total lumens?
- Why does converting lux to lumens need surface area?
- How does changing area affect lumens at 1200 lux?
- Is 1200 lux high or low when converted to lumens?
Conversion Definitions
Lux: Lux is the SI unit measuring illuminance, representing luminous flux incident per unit area. It quantifies how much light hits a surface, calculated as lumens per square meter. Lux helps assess brightness levels experienced by human eyes on given surfaces.
Lumens: Lumens measure luminous flux, or total light output from a source. The unit quantifies visible light emitted in all directions. Lumens describe brightness perceived from a lamp or bulb, independent of area or distance.
Conversion FAQs
Can I convert lux to lumens without knowing surface area?
No, lux measures light per square meter, while lumens is total light emitted. Without the area illuminated, conversion is not possible because lumens = lux × area. Area is necessary to calculate total luminous flux.
What happens to lumens if the surface area increases but lux stays constant?
If lux remains the same but the surface area increases, total lumens increases proportionally. Because lumens equal lux times area, doubling area doubles lumens, even though illuminance per unit area stays constant.
Why is lux used instead of lumens for lighting measurements?
Lux accounts for how light spreads over a surface, providing more practical info about illumination at specific points. Lumens indicate total light output but don’t reflect how bright a surface appears, making lux more useful for lighting design.
Does the shape of illuminated area affect lux to lumens conversion?
Shape does not directly affect conversion because lumens depend only on total area size, not shape. However, shape can influence light distribution, causing variations in local lux, but total lumens = lux × total area regardless of shape.
Is the lux to lumens conversion affected by light source direction?
Lux measures light hitting a surface, so direction impacts illuminance. Lumens measure total output in all directions. Therefore, conversion assumes uniform distribution or known area receiving the light; otherwise directional effects complicate exact conversion.
I’ve put so much effort writing this blog post to provide value to you. It’ll be very helpful for me, if you consider sharing it on social media or with your friends/family. SHARING IS ♥️
